It doesn’t rely on its face to eat, strength is the last word! Still struggling with the choice of a tire removal machine? Do you have any bells and whistles on the market? Don’t be fooled by appearances! The real strength never relies on appearance to win! Today, I would like to reco...
Mar-14-2025
Does your car suffer from heavy wear on the inside or outside of your tires? Do you find that the tire pattern is irregularly worn, or even “tires gnawing”? Don’t ignore these signals! Abnormal tire wear not only shortens the life of the tire, but also hides hidden driving safet...
Mar-08-2025
When driving, does your steering wheel shake like a sieve? At high speeds, do your palms sweat and your heart race? Don’t panic! This isn’t your fault; it’s your car sending out a distress signal! Steering wheel shaking hides dangers! Increased tire wear shortens lifespan. Damag...
Mar-07-2025
1. Tire problems Uneven tire pressure: Inconsistent tire pressure on both sides can lead to mistracking, check and adjust the tire pressure. Uneven tire wear: When one side is severely worn, the tire needs to be checked and replaced. 2. Four-wheel alignment is required Chassis parameter deviation...
Mar-05-2025
The Roadbuck R600 wheel aligner uses 3D measurement software to automatically measure and diagnose chassis data reports, which are included 1: Inspect the vehicle before positioning before adjusting the chassis data, which helps to find potential problems with the vehicle The record of the vehicl...
Mar-04-2025
Guangdong Roadbuck Electromechanical Equipment Co., Ltd. was established from 2003 to 2025, has an AI intelligent model to achieve automatic measurement and diagnosis of chassis data and automatic tracking measurement of the four-wheel aligner, model R600, all products are their own research and ...
Mar-03-2025
Guangdong Roadbuck Electromechanical Equipment Co., Ltd. is located in Foshan City, Guangdong Province, close to Guangzhou, with convenient transportation, convenient logistics system, focusing on scientific and technological innovation, and a strong atmosphere of technological innovation Guangdo...
Feb-18-2025
1. Driving the car on the lift slowly,the two front wheels are located in the centre of the corner discs 2. Checking four tire’s air pressure 3. And make sure they are approximate 4. Press down the car head 5. According to the label on the target,Using the clamp jaw to fix the gap be...
Feb-17-2025
The working principle of the Guangdong Lubake 3D Wheel Aligner, also known as the 3D Digital Imaging Four-Wheel Aligner, is based on the principles of perspective in physics combined with computer information processing technology. As an object moves closer, its visual size appears to increase, a...
Feb-15-2025
The Roadbuck brand wheel alignment systems, produced by Guangdong Lubake Electromechanical Equipment Co., Ltd., are primarily used to detect and adjust the following vehicle data: Toe Angle: The inward or outward angle of the front edge of the wheels, affecting straight-line driving and tire wear...
Feb-14-2025
Wheel alignment refers to adjusting the angles and positions of a vehicle’s four wheels to meet the manufacturer’s standards, ensuring driving stability, safety, and even tire wear. Main Adjustment Parameters Toe Angle: The inward or outward angle of the front of the wheels. Positive ...
Feb-13-2025
The Road buck Wheel Aligner R800 is one of the most high-end 3D wheel aligners produced by the Roadbuck brand. Here is a detailed introduction to the features of the Road buck Wheel Aligner R800: 1. Standard software: standard plane V3D software 2. Basic functions: camber, kingpin camber, kingpin...
Feb-08-2025