Current page:





Main 6 car washing methods in domestic and foreign markets

Main 6 car washing methods in domestic and foreign markets

 1, no water car wash

    It adopts special formula and is called “quick hand spray wax”. It does not use water when washing,
and completes all work of car washing and waxing in a few minutes. Waterless car wash is actually a wax wash

Technology, the car wash wax used to protect the car paint layer, tire rubber. This type of car wash is
mainly suitable for vehicles with relatively clean paint. For dirty

The car washes poorly and requires a professional car wash.

    2, contactless car wash machine

In the cleaning process, only fluids such as water and high-efficiency washing liquid are in contact with the
vehicle body, and no solid objects (such as soft cloth and brush) are in contact with the vehicle body, so it
is called “contactless car wash”. this

The technology is characterized by “no contact, zero wear”, so it is suitable for the cleaning of high-end
cars. This technology is an advanced automatic car wash technology developed in the United States in the

hydraulic lift for car wash

At present, 70% of car wash equipment in North America adopts this technology, and its market share in Europe
is also over 60%.

3, micro water car wash

    Micro-water washing is an upgrade of high-pressure washing machine. “Micro-washing car” uses the
principle of “separation of gas and water, constant impact pressure, combined with high-tech conversion and

The technology upgrade was carried out on the basis of the high-pressure car washing machine. The micro water
cleaning equipment can separate the gas and water phases, and match the pump pressure and water pressure to
clean the dirt and clean the dirt outside the vehicle.

It can be used alone, and the part inside the car can be used alone. In this way, the water consumption of
the car wash is small, and it can be used continuously within 15 minutes. The water consumption is less than
1.5L, and the related equipment also has its own

Dynamic heating device, the winter water can be warm water. It saves water, but it consumes a lot of
electricity and needs to go to a professional car wash.

car wash equipment

    4, computer car wash

Fully automatic computer car wash is one of the hot industries at present. All the water used in the car wash
process will pass through the water circulation system and be recycled after treatment. Computer car wash

Fast speed, water conservation and low cost have become the most popular car wash methods in large cities in

5, high pressure water gun car wash

    The high-pressure water gun car wash is directly connected to the faucet with a high-pressure water
gun for body cleaning. The car wash is washed from top to bottom, that is, from the roof, front and rear
covers, body side and lamps.

Bumpers, skirts, wheels, etc. Disadvantages: This method wastes water seriously. On average, cleaning a car
requires about 60 liters of water. Today, in promoting water conservation, many cities

The city has been banned. Also need to wash to a professional car wash.

    6, portable car wash

In recent years, with the popularization of family cars, with the increase in the demand for personal car
washing, some enterprises (individuals) have also begun to develop portable car washing machines. It is
understood that the current market push

Most of the portable car washing machines are powered by independent batteries and solar energy. Because the
battery is very damaging to the environment, portable car wash powered by a stand-alone battery

The machine is generally not welcomed by modern environmentalists. A portable car washing machine powered by
solar energy has been developed in recent years, but the use of solar energy as a power source is costly.

One is that the solar cell is flat, which is inconvenient to carry and place. Therefore, the shortcomings of
this car washing machine are also obvious.



Leave your question