logo
https://www.traditionrolex.com/34

Current page:

Home

/

NEWS

/

What should I pay attention to when buying car lift?

What should I pay attention to when buying car lift?

1. The floor space and height of the car lift in the workshop, the specific use of the car lift in maintenance and maintenance, and whether it should be used with the four-wheel aligner. For example, the hydraulic lifting is stable and the safety performance is good.

However, the hydraulic system is not easy to handle, so it is necessary to pay attention to the selection of the cylinder and hydraulic power
unit with good quality and durable; the bottomless frame design has the advantage of good vehicle passing, and the lower chassis can also

Very easy to support, but the requirements for foundation conditions are higher; while vehicles with chassis design have poor passability,
vehicles with lower chassis cannot support, but the requirements for foundation conditions are not high; and flat car lifts

The structure is simple, but there will be a tubing burst and the unsynchronized failure of the two platforms. At present, there are few
models with good synchronicity of the domestic flat-type car lifts, most of which are counterfeit to each other.

buy car lift

Manufacturers are confusing.
 
2, the price is usually the first thing to be considered by the repair shop owner when purchasing the car lift, but this is probably a big
mistake. Imagine if the cheapest car lift is to be repaired in a short time. in fact

The cost of the car may be much higher than the cost of a car lift that is more expensive to buy at a well-known manufacturer;

3. Be sure to pick a car lift that requires only a minimum amount of maintenance, and you can get reliable service during the warranty
period;

Single Post Car Lift
 
4. You should be aware of the total installation cost of the car lift purchased, including all the expenses of buying a car lift;

portable car hoist

5. If your repair shop is in the new or transition period, some car lift manufacturers will also provide computer-aided design (CAD) plans.
In order to make reference to the roadbuck designer.

Jan-24-2019

admin

Leave your question

    Technical Support: Magic Lamp